▷ AZ-Delivery Project: Halloween Pumpkin with red and green LED eyes

AZ-Delivery Project: Halloween Pumpkin with red and green LED eyes

Hello AZ-Delivery community, in this video we want to design and program a cheap and weatherproof solution for the LED eyes of our pumpkin. The idea is to put sparkling eyes with RGB LEDs in the eye cavities, which can light up in different colors depending on the distance of passing people.
The full tutorial with the required products is available at: https://www.az-delivery.de/en/blogs/azdelivery-blog-fur-arduino-und-raspberry-pi/die-augen-des-kurbisses-halloween-kommt-ganz-plotzlich

What you will need:
1 x Microcontroller Board ATmega328 https://bit.ly/3Gkwi25 (alternatively: D1 Mini NodeMcu with ESP8266-12F WLAN module https://bit.ly/3vKLsZv) & power supply for the MCU
2 x RGB LED https://bit.ly/3jBPNtp
6 x Resistance (220 to 680 Ohm) https://bit.ly/3mgJoFM
1 x VL53L0X Time-of-Flight (ToF) Laser distance sensor https://bit.ly/3jAPgaW (alternatively: HC-SR04 Ultrasound Module Remote Sensor https://bit.ly/2XLdwj3)
1 x Shrinking tube assortment https://bit.ly/2ZixoKK
Jumper Wires https://bit.ly/3nLSiuv

00:00 Preview 🎃
00:06 Soldering
01:15 Sketch Upload
01:32 Wiring
03:03 Testing
03:13 Pumpkin